FACADE PAINTS

no.0024

JOKER FARB-SNZ - self-cleaning silicone facade paint, intended for decorative and protective coatings, resistant to algae and fungi.

Bucket: 5 L / 10 L,
Palette of 365 colors,

JOKER FARB-SNZ is a silicone paint intended for painting cement, cement-lime plasters, thin-layer mineral plasters, gypsum and concrete surfaces, and cement-asbestos boards. It is also used for painting raw surfaces made of bricks, blocks, hollow bricks and other similar ceramic or lime-sand materials. The use of JOKER FARB-SNZ paint is especially recommended for painting historic and industrial buildings. It is also suitable for use on residential, single and multi-family buildings, farm buildings, as well as on other buildings and construction elements particularly exposed to the damaging effects of weather conditions and surface contamination. JOKER FARB-SNZ paint can be used for primary and renovation painting, inside or outside the building. White or 365 colors.



• Self-cleaning ability,
• Dirt-resistant,
• High mechanical strength,
• No wrinkles and cracks,
• Ecological and resistant to microorganisms,
• Resistant to algae and fungi,
• Used outside buildings,
• Resistant to UV radiation,
• Protects against moisture penetration,
• Vapor-permeable,
• Dyed from a palette of 365 colors or on individual order,
• We recommend the SPRINTER-FT product as an agent that accelerates setting and drying,



JOKER FARB-SNZ is a silicone paint intended for protective and decorative coatings. It is characterized by very good vapor permeability and creates a coating without wrinkles and cracks, protecting against the penetration of moisture, algae and fungi.



IMPORTANT INFORMATION:

- Consumption: 0.30 L/m2 (when painting twice),
- Gloss level: matte,
- Application temperature: +5°C to +28°C,
- Drying time: from 30 minutes to 6 hours,
- Application method: manual / spray,
- Shelf life: 12 months,



PROPERTIES:

JOKER FARB-SNZ provides very good covering properties and makes the painted surface resistant to wrinkles, cracks and dirt. The paint coating is matte, smooth and perfectly protects the painted surface. The structure of the coating made with JOKER FARBS-SNZ silicone paint is microporous, which allows for the free transport of water vapor and release of moisture through the facade to which the paint has been applied. Thanks to the silicone coating, the facade does not absorb water and is self-cleaning, which limits the possibility of dirt deposition and the development of algae and fungi on the painted surface. JOKER FARB-SNZ paint is resistant to changing weather conditions, chemical agents and UV radiation.



PAINT PREPARATION :

JOKER FARB-SNZ is supplied ready to use. Before use, it must be thoroughly mixed to even out the consistency, using a low-speed drill with a mixer. For the first painting, you can add a maximum of 2% clean water, one 200 ml glass per 10 liter container of paint. The adopted dilution proportions should be maintained on the entire painted surface.



PREPARATION OF THE FACADE FOR PAINTING

Before painting the facade, it should be thoroughly cleaned; the substrate should be dry, stable and free from dust, dirt and grease. Old, loose and cracked paint coatings should be removed. This can be done using a pressure washer or special cleaning agents.



REPAIR OF DAMAGES:

If there are any damages, defects or cracks on the facade, they should be repaired and filled with special RAPID repair compounds:

- ZW-013 MORTAR, 
- RAPID CONCRETE RC-10, 
- RAPID CONCRETE RC-20, 
- RAPID CONCRETE RC-30,  


  
PRIMING:

Before painting the facade, it should be primed with JOKER GRUNT-SNZ primer. The primer will ensure better adhesion of the paint to the substrate and protect the facade against moisture.


PAINTING:

The facade can be painted with a roller or brush. JOKER FARB-SNZ paint is applied from the top of the facade, creating even, overlapping stripes.


TOOLS:

Brush or brush, paint roller, machine. Tools should be washed with clean water immediately after use.

STEP 1: Clean the facade from dust, dirt and grease using a pressure washer, and remove old, loose and cracked paint coatings,

STEP 2: Repair of damaged and cracked façade using RAPID repair mortar:

- ZW-013 MORTAR,
- RAPID CONCRETE RC-10,
- RAPID CONCRETE RC-20,
- RAPID CONCRETE RC-30,


STEP 3: Substrates with high water absorption and absorbency should be primed with JOKER GRUNT-SNZ.

STEP 4: Painting the facade with the selected color. Colored from a palette of 365 colors or on individual order.


HOW TO USE PAINT:

Apply a thin, even layer of JOKER FARB-SNZ paint to the prepared and primed substrate with JOKER GRUNT-SNZ primer. The paint can be applied with a roller, brush or spraying method, not earlier than 6 hours after priming the substrate; the paint should be applied once or twice, depending on the absorbency and structure of the substrate. The second layer should be applied crosswise to the first one after a minimum of 6 hours. Breaks during painting should be planned in advance, for example in the corners and bends of the building, under downpipes, at the junction of colors, etc. Paint should be applied to the planned surface continuously, avoiding interruptions in work. The painted surface should be protected, both during the work and while the paint is drying, against direct sunlight, wind and precipitation. The drying time of the paint, depending on the substrate, temperature and air humidity, is approximately 30 minutes.


Plastering coatings can be painted after complete drying, not earlier than:

- for mineral plasters after 3-4 weeks,
- for acrylic plasters after 7 days,


ATTENTION:

To avoid differences in color shades when using colored paints, paint with the same production date should be applied to one surface. As a result of painting, the surface texture naturally becomes slightly smoother. Painting surfaces that differ in texture and technical parameters may result in the effect of different shades of a given paint color.

This information constitutes basic guidelines for the use of the product and does not exempt you from the obligation to perform work in accordance with the principles of construction practice.



WEAR NORMS:

When painting twice, an average of 0.30 L/m2 of paint is used on a smooth surface. In practice, consumption depends on the thickness of the applied paint layer and the absorbency and texture of the substrate. Therefore, we recommend that it be determined precisely on a sample basis.


For plastering, the consumption is as follows:

- for mineral plasters, approx. 1 L of paint per 4.0 m2
- for acrylic plasters, approx. 1 L of paint per 4.5 m2


STORAGE AND TRANSPORT:

Transport and store in tightly closed buckets, in dry conditions, preferably on pallets. At positive temperatures from +5°C to 28°C.

Protect against overheating.



SHELF PERIOD:

12 months from the production date indicated on the packaging.



PACKAGING:

BUCKET 5L / 10 L


PALETTE:

5 L x 72 pieces = 360 Liters
10 L x 44 pieces = 440 Liters

SPRINTER-FT 
Agent that accelerates setting and drying
paints and plasters

JOKER GRUNT-SNZ
Silicone priming emulsion
to strengthen the substrate and
 protection 
against moisture

RAPID CONCRETE RC-10
Binding mortar
 for repairing 
the damaged concrete 

RAPID CONCRETE RC-20
Coarse-grained mortar 
for repairing and strengthening damaged concrete

RAPID CONCRETE RC-30
Fine-grained mortar
for repairing damaged concrete surfaces

ZAPRAWA ZW-013
Leveling mortar
filling cavities
in the substrate

CONTAKT

Tel: +251 969 911 100
Tel: +251 911 209 922

E-maim: arsanit4u@gmail.com