no.0049

ACCESSORIES - a set of accessories and sealing tapes for waterproofing work in bathrooms, kitchens and on balconies and terraces.

Waterproofing accessories and tapes are designed to increase the watertightness of areas particularly prone to dampness, such as corners, wall-floor junctions, etc., and to provide watertightness where there are stresses and cracks when waterproofing inside buildings. The waterproofing tapes can be used for sealing under ceramic tiles and are recommended for outdoor use as reinforcing inserts when waterproofing balconies and terraces.

TECHNICAL DATA:

- watertight at 0.15 MPa,
- no leakage,
- fatigue resistant,
- Use in kitchens and bathrooms, 
- use on balconies and terraces, 
- No cracking of the coating and tape in the area of bonding ,

HYDRO-MP - floor sealing cuff.

Dimension: 420 x 420 mm,
Packaging: 10 pieces,

HYDRO-MS - wall sealing cuff.

Dimension: 120 x 120 mm,
Packaging: 25 pieces,

HYDRO-NW - internal sealing corner.

Dimension: 120 x 120 mm,
Packaging: 25 pieces

HYDRO-NZ - external sealing corner.

Dimension: 110 x 110 mm,
Packaging: 25 pieces,

HYDRO-TU120 - sealing tape.

Tape width: 120 mm,
Packaging: 50 meters,

HYDRO-TU150 - sealing tape.

Tape width: 150 mm,
Packaging: 50 meters,

HYDRO-TUB - TREP sealing tape with butyl strip.

Tape width: 120 mm,
Butyl strip:  1-sided adhesive with a width of 15 mm,
Packing unit: 10 metres:

- Hydro-TU120 TPER sealing tape, tape width 120 mm,
- Hydro-TU150 TPER sealing tape, tape width 150 mm,
- Hydro-TUB sealing tape with a butyl strip, tape width 120 mm, butyl strip 15 mm,
- Hydro-WB15 butyl tape, width 15 mm, double-sided adhesive,
- Hydro-TB150 butyl tape, width 150 mm,
- Hydro-NW internal sealing corner TPER, 120×120 mm,
- Hydro-NZ external sealing corner TPER, 110×110 mm,
- Hydro-MS TPER wall sealing sleeve, 120×120 mm,
- Hydro-MP TPER floor sealing sleeve, 420×420 mm,
- Hydro-MU TPER sealing mat,
- Hydro SD6 expansion cord, diameter 6 mm,
- Hydro SD8 expansion cord, diameter 8 mm,

HOW TO PERFORM HYDROLYZATION
STEP BY STEP TIPS

Possibility of gluing tiles after about 2 hours after gluing the mat.

Laying the corner and applying the second layer of moisture insulation, with a certain central part of the element remaining uncovered.

Surface preparation for sealing tape. Pasted sealing tape.

Pasting the sealing tape in the vertical expansion joint. Forming the tape.

Application of the second layer of sealing compound.

Surface preparation, installation of the sealing mat on the wall or wall cuff, forming.

Application of sealing compound.

Installing the wall cuff. Forming, applying the second layer of sealing compound.

Preparation of the surface for installation of the sealing mat and floor cuff, applying the first layer of sealing compound, measuring the diameter of the downspout

Preparation of the hole in the floor cuff,
installation.

Forming, applying the second layer of sealing compound.

Waterproofing before the final stage of gluing tiles.

Possibility of gluing tiles after about 2 hours after gluing the mat.

CONTACT

Tel: +251 969 911 100
Tel: +251 911 209 922

E-maim: arsanit4u@gmail.com