Skip to content
Arsanit
  • HOME
  • ABOUT US
  • OFFER
    • TYNKI STRUKTURALNE
    • PODKŁADY TYNKARSKIE
    • FARBY I GŁADZIE
      • FARBY ZEWNĘTRZNE
      • FARBY WEWNĘTRZNE
      • SMOOTHING MASS
    • ZAPRAWY
      • ZAPRAWY TYNKARSKIE
      • ZAPRAWY MURARSKIE
      • ZAPRAWY NAPRAWCZE
      • ZAPRAWY KLEJOWE DO ZATAPIANIA SIATKI
      • ZAPRAWY KLEJOWE DO PRZYKLEJANIA STYROPIANU
    • HYDROLIZACJE
    • KLEJE DO PŁYTEK
    • PODKŁADY PODŁOGOWE
    • PODKŁADY GRUNTUJĄCE
    • ARTE – FX
    • PRODUKTY POMOCNICZE
    • SYSTEM SOLUTIONS
  • SAMPLES
  • CONTACT
  • Toggle website search
Menu Close
  • HOME
  • ABOUT US
  • OFFER
    • TYNKI STRUKTURALNE
    • PODKŁADY TYNKARSKIE
    • FARBY I GŁADZIE
      • FARBY ZEWNĘTRZNE
      • FARBY WEWNĘTRZNE
      • SMOOTHING MASS
    • ZAPRAWY
      • ZAPRAWY TYNKARSKIE
      • ZAPRAWY MURARSKIE
      • ZAPRAWY NAPRAWCZE
      • ZAPRAWY KLEJOWE DO ZATAPIANIA SIATKI
      • ZAPRAWY KLEJOWE DO PRZYKLEJANIA STYROPIANU
    • HYDROLIZACJE
    • KLEJE DO PŁYTEK
    • PODKŁADY PODŁOGOWE
    • PODKŁADY GRUNTUJĄCE
    • ARTE – FX
    • PRODUKTY POMOCNICZE
    • SYSTEM SOLUTIONS
  • SAMPLES
  • CONTACT
  • Toggle website search
TILE ADHESIVES
no.0051
CERAMIK CZ-01 - waterproof tile adhesive - CLASS C1 designed for bonding wall and floor tiles indoors.

PACKAGING: 25 kg, bag
APPLICATION: Indoors,
CERAMIK CZ-01 is a thin layer waterproof adhesive, designed for fixing ceramic tiles on walls and floors indoors. CERAMIK CZ-01 adhesive is used for fixing tiles, terracotta, stoneware and stone tiles on dry or wet substrates made of ceramic materials. It can be used on various types of rigid substrates such as concrete, cement plaster, or cement-lime plaster.


- For bonding tiles, terracotta,
- Indoor use,
- Easy to apply,
- Environmentally friendly,


PROPERTIES:

CERAMIK CZ-01 is a waterproof adhesive designed for indoor use, with a permissible tile format of up to 30 cm. It is manufactured on the basis of cement and minerals. It is distinguished by its great convenience and ease of use, while ensuring high performance.


IMPORTANT INFORMATION:

- Proportions: 5.5 - 6.25 L of water per 25 kg of mortar (0.22 - 0.25 L/kg),
- Adhesive layer thickness: 2 mm - 5 mm,
- Application temperature: +5°C to +28°C,  
- Water resistance: YES,
- Permissible tile size: up to 30 cm,
- Grouting: after 24 hours,
- Floor use: after 24 hours,
- Open time: 20 minutes,


MIXING RATIO:

Pour the dry mixture into approximately 5.5L of water and mix thoroughly by hand or mechanically until a homogeneous mixture is obtained. 

- The adhesive is suitable for use after 5 minutes and re-mixing, 
- Tiling time after application of the adhesive: maximum 10 minutes,
- The adhesive should be used within 2 hours,
Cleaning the substrate from oil, grease, paint 
and other residues.
Priming the substrate with a suitable primer.
Bonding and correcting tiles with a permissible tile size of up to 30cm.
EXECUTION:

Work should be carried out at a temperature between +5°C and +28°C. The substrate to which CERAMIK CZ-01 adhesive is applied should be clean, even, free from oil, grease, remains of paint and other paint coatings. Highly absorbent substrates should be primed with AKRYL GRUNT GRUNTEX or AKRYL GRUNT STRONGER. When bonding to difficult unstable substrates, an adhesion test should be carried out. CERAMIK CZ-01 adhesive mortar should be applied on the prepared substrate with a notched trowel with teeth lengths of 3mm - 8mm. Tiles should be glued and corrected within 10 minutes from application of the mortar on the substrate. The thickness of the layer should not exceed 5mm. Once fully set, proceed with grouting. 


Note: Do not soak the tiles before bonding!



RECOMMENDATIONS:

The instructions define the scope of application of the product and the recommended method of carrying out the work, but cannot replace the professional preparation of the work contractor. The manufacturer guarantees the quality of the product, but has no influence on the conditions and method of use.

 
NOTE:

The mortar contains cement. With water it gives an alkaline reaction. Protect eyes and skin. In case of eye blockage, rinse with plenty of water.


STORAGE:

Store in original sealed packaging in a dry room on pallets.

 Protect from moisture.


SHELF LIFE:

12 months from the production date on the packaging.


PACKAGING:

25 kg, bag


PALLET:

25 kg x 48 pieces = 1200 kg.
RECOMMENDED
AKRYL GRUNT GRUNTEX
Universal strong 
priming emulsion
absorbent substrates
AKRYL GRUNT STRONGER
Primer concentrate for highly absorbent 
substrates
DO YOU HAVE QUESTIONS WRITE TO US
WE ARE HERE FOR YOU
CONTACT
Tel: +251 969 911 100
Tel: +251 911 209 922

E-maim: arsanit4u@gmail.com
  • HOME
  • ABOUT US
  • OFFER
    • TYNKI STRUKTURALNE
    • PODKŁADY TYNKARSKIE
    • FARBY I GŁADZIE
      • FARBY ZEWNĘTRZNE
      • FARBY WEWNĘTRZNE
      • SMOOTHING MASS
    • ZAPRAWY
      • ZAPRAWY TYNKARSKIE
      • ZAPRAWY MURARSKIE
      • ZAPRAWY NAPRAWCZE
      • ZAPRAWY KLEJOWE DO ZATAPIANIA SIATKI
      • ZAPRAWY KLEJOWE DO PRZYKLEJANIA STYROPIANU
    • HYDROLIZACJE
    • KLEJE DO PŁYTEK
    • PODKŁADY PODŁOGOWE
    • PODKŁADY GRUNTUJĄCE
    • ARTE – FX
    • PRODUKTY POMOCNICZE
    • SYSTEM SOLUTIONS
  • SAMPLES
  • CONTACT
Copyright 2025 - ARSANIT