JOKERGrunt-STZ is a silicate preparation intended for priming substrates for silicate paints and all mineral substrates, such as: cement, cement-lime plasters, thin-layer mineral plasters, concrete and for raw surfaces made of bricks, blocks, hollow bricks and other similar ceramic or lime-sand materials.
- intended for priming,
- under silicate paints,
- for priming all mineral substrates,
- ready-to-use product,
- for indoor and outdoor use,
IMPORTANT INFORMATION:
- Consumption approximately 0.15 L/m2,
- Drying time: about 30-40 minutes,
- Application temperature: from +5°C to +28°C,
- For use: outdoor / indoor
- Shelf life: 12 months,
PROPERTIES:
The silicate primer JOKERGrunt-STZ is produced on the basis of potassium water glass and a special synthetic resin. Its action is to strengthen and equalize the absorbency of the substrate and to increase the adhesion of silicate paint to the substrate. The JOKERGrunt-STZ layer is transparent and colorless after drying and has hydrophobic properties.
SUBSTRATE PREPARATION:
The substrate should be even, dry, stable, sufficiently strong and free from layers that may weaken the adhesion of the plaster or silicate paint, especially dust, dirt, wax and grease. Old paint coatings and other layers with poor adhesion to the substrate as well as coatings made of dispersion paints should be carefully removed. Damage to the plaster, e.g. cracks, defects, scratches, should be repaired and filled.
TOOLS:
Roller or paint brush. Tools should be washed with clean water immediately after use.
PREPARATION:
JOKERGrunt-STZ is produced as a ready-to-use preparation. It must not be diluted or combined with other materials.
EXECUTE:
JOKERGrunt-STZ should be applied to the substrate with a roller or brush, creating a thin and even layer. On very absorbent substrates, priming can be repeated transversely (crosswise) to the first layer. The second layer of the preparation can be applied no sooner than 4 hours after the first priming. The drying time of the silicate primer JOKERGrunt-STZ depends on the type of substrate, temperature and relative air humidity and is approximately 30-40 minutes. Priming the substrate for painting with silicate paints should be done at least 4 hours in advance. When diluting silicate paint, you can add a maximum of 4% of the JOKERGrunt-STZ preparation by volume. You can add a maximum of 0.4 liters of preparation per 10 liter package.
This information constitutes basic guidelines for the use of the product and does not exempt you from the obligation to perform work in accordance with the principles of construction practice.
NORMAL CONSUMPTION:
The average consumption of priming emulsion is approximately 0.15 L of the preparation per 1 m2. In practice, consumption depends on the absorbency of the substrate.
ATTENTION:
The product contains potassium water glass, which may be aggressive to metals, glass and wood. Protect your eyes and skin. In case of direct contact with eyes, rinse with plenty of water.
Keep away from children!
STORAGE AND TRANSPORT:
The preparation should be stored in tightly closed packaging, in dry conditions, at a positive temperature.
Protect against overheating and frost!
SHELF PERIOD:
12 months from the production date indicated on the packaging.
PACKAGING:
5 Liter, canister
PALETTE:
5 L x 108 Canisters = 540 Liters. PALETTE