Uni-Kontakt HD, after dilution, is intended for highly absorbent substrates and porous surfaces made of aerated concrete, silicate, brick, hollow bricks and plasterboards. The preparation impregnates the wall to avoid water absorption from subsequent layers, reduces plaster shrinkage and increases plaster adhesion.
It is recommended for self-leveling floor systems. Its use reduces shrinkage and increases the flow and adhesion of the mass to the parent substrate.
- improving and priming agent,
- intended for absorbent substrates for plasters,
- cement-lime and plaster,
- ready to use (just mix)
- high adhesion,
- high efficiency,
- used indoors and outdoors,
IMPORTANT INFORMATION:
- Consumption: approx. 0.1-0.3 kg/m2 (when diluted 1:3),
- Drying time: minimum 4 hours,
- Application temperature: from +5°C to +28°C,
- To be used: for outdoor / inside
- Application method: roller / brush,
- Shelf life: 9 months,
PROPERTIES:
Thanks to the use of the preparation, the applied layers bind and dry evenly, achieve the assumed strength parameters and are not exposed to chafing. After drying, it creates a coating that is permeable to water vapor. The product is based on mixtures of polymer dispersions and specialized modifying admixtures.
HOW TO USE:
The substrate should be stable and free from any contaminants that may impair the adhesion of the preparation, especially dust, dirt, oil, grease, remnants of paint coatings and agents. Poorly bonded parts of the substrate should be chipped off, and the flaking parts should be additionally cleaned with a wire brush. The substrate to which the Uni-Kontakt HD agent is to be applied should be properly dried and its humidity cannot exceed 3%.
Uni-Kontakt HD is produced in the form of a concentrate and is diluted with clean water - in proportions depending on the absorbency of the primed substrate:
• For ceramic substrates – 1:3 (mix 15 kg of concentrate with 45 L of water)
• For highly absorbent substrates such as concrete – 1:2 (mix 15 kg of concentrate with 30 L of water) or 1:2.5 (mix 15 kg of concentrate with 37.5 L of water)
The concentrate should be mixed with water using a drill with a mixer until a homogeneous consistency is obtained.
It must not be combined with other materials!
WEAR:
Average consumption approximately 0.1-0.3 kg/m2 (when diluted 1:3)
STORAGE AND TRANSPORT:
Store in a cool room in original packaging.
PROTECT AGAINST OVERHEATING AND FROST!
SHELF PERIOD:
9 months from the production date indicated on the packaging.
PACKAGING:
Bucket 15 kg,
PALETTE:
15kg x 24 buckets = 360kg. PALETTE
