ARTE SUPER FINISH is a high-quality, ready-to-use mass intended for finishing indoors, including those with increased humidity. Suitable for creating a perfectly smooth layer under acrylic, latex and emulsion paints. It can be successfully used for walls and ceilings with cement-lime, gypsum or plasterboard plasters.
The mass is intended for manual, roller and machine application.
• high adhesion to substrates,
• perfectly smooth surface,
• applies nicely and sands dust-free,
• the plaster is flexible,
• resistant to cracking,
• for manual and machine use,
Application temperature from +5°C to +28°C
SUBSTRATE PREPARATION:
The substrate should be load-bearing, dry, cleaned and primed with a preparation with high absorbency, for example Akryl Primer Stronger or Uni-Kontakt Cover HD (dilution 1:3) with a bonding layer, and in the case of a smooth, non-absorbent substrate B-TON Kontakt.
PREPARATION OF THE PLATE:
The product is ready for use. If applied by hand, do not dilute with water or mix with other materials. When applied with a paint or mechanical roller, a small amount of water may be added to improve the consistency. Mix the contents of the package thoroughly before use.
- In case of spray application, it is recommended to add a maximum of 2% water.
- When applying with a roller, add a maximum of 1% water.
EXECUTION:
MANUAL APPLICATION:
The mass should be applied using a roller, spreading it evenly over the surface. Smooth the applied layer using a stainless steel trowel.
APPLICATION WITH A Trowel:
The mass should be applied evenly using a stainless steel trowel, pressing it to the surface. The maximum layer thickness (2 millimeters) should not be exceeded. Work should start from the ceiling, applying the mass in strips in the direction from the window towards the interior of the room, pulling the trowel towards you, and on the walls, apply the mass in the direction from the floor to the ceiling, moving the trowel from the bottom to the top.
The next layer of mass can be applied in two ways:
- on the pre-bonded layer when its surface is matt and damp (which usually happens after about 1 hour at a temperature of 20°C).
- after the first layer has hardened (its surface should be moistened with water before applying the next layer, which will minimize the formation of bubbles during application).
GRINDING:
Manual or mechanical cleaning should be done after the surface is completely dry.
It is recommended to use meshes with a gradation of 140 to 240.
RECOMMENDATIONS:
The instructions specify the scope of use of the product and the recommended method of performing the work, but cannot replace the professional preparation of the contractor. The manufacturer guarantees the quality of the product, but has no influence on the conditions and method of its use.
STORAGE:
Storage period in a closed container: 12 months from the production date at a temperature of +5°C to +30°C. Opening the packaging can significantly shorten this time. The production date, product range and production batch number are provided on the packaging.
SHELF PERIOD:
12 months from the production date indicated on the packaging.
PACKAGING:
Bucket 18 kg,
PALETTE:
18 kg x 44 pieces = 729 kg. PALETTE
