Arte-Grunt is a primer plaster intended for preparing the substrate for modeled plasters. It can be used on all even and load-bearing mineral substrates, such as concrete, plaster, traditional cement, cement-lime plasters and plasterboards. Can be used indoors and outdoors.
- Ready-to-use mass,
- Gives the primed surface proper roughness,
- Facilitates the application of plasters,
- Improves grip,
- Evens the absorbency of the substrate,
- Gives the primed surface roughness,
IMPORTANT INFORMATION:
- Consumption: approximately 0.2 l/m2,
- Drying time: about 4 hours,
- Application temperature: +5°C to +28°C,
- Shelf life: 12 months,
- For use: outdoor / indoor,
PROPERTIES:
Arte-Grunt is a ready-to-use mass produced on the basis of synthetic resins and quartz flour. It is a white primer. We also offer other colors upon request. Arte-Grunt is an efficient, convenient and easy-to-use product. The filler content gives the primed surface a roughness that facilitates the application of subsequent layers and increases the adhesion of the plaster connection to the substrate. The use of Arte-Grunt plaster primer not only improves adhesion but also reduces the possibility of stains on the surface of the modeled plaster resulting from improper preparation of the substrate or its properties.
SUBSTRATE PREPARATION:
The substrate should be stable, even and sufficiently strong, free from layers that may impair adhesion, especially dust, dirt, lime, oil, grease and wax. Old paint and plaster coatings with insufficient adhesion should be removed.
Irregularities and defects should be leveled and removed.
HOW TO USE:
Arte-Grunt plaster base mass is delivered ready-to-use. It must not be combined with other materials, diluted or thickened. Immediately before use, the mass should be stirred to even out the consistency. The Arte-Grunt primer should be spread evenly over the entire surface using a roller or brush. Do not apply the mass at temperatures below +5°C. Plastering the surface can be started after the mass has completely dried, i.e. approximately 5-6 hours after its application.
WEAR NORMS:
The average consumption is about 0.2 liters per 1 m2
TOOLS:
Roller or paint brush. Tools should be washed with clean water immediately after use.
ATTENTION:
Keep away from children. Protect eyes and skin.
RECOMMENDATIONS:
The instructions specify the scope of use of the product and the recommended method of performing the work, but cannot replace the professional preparation of the contractor. The manufacturer guarantees the quality of the product, but has no influence on the conditions and method of its use.
STORAGE AND TRANSPORT:
Transport and store in tightly closed original packaging (preferably on pallets) in dry conditions, at a positive temperature. Protect against overheating.
Do not leave opened containers.
SHELF PERIOD:
12 months from the production date indicated on the packaging.
PACKAGING:
Bucket: 5L / 10 L
PALETTE:
5 L x 72 buckets = 360 L. PALLET
10 L X 44 buckets = 440 L. PALLET
