Arte-Fix M is a ready-made product intended for the renovation and maintenance of mosaic plasters. Thanks to its properties, the varnish stain allows for quick, convenient and, above all, effective maintenance and improvement of the appearance of mosaic plasters. The new product complements the ARSANIT offer in the field of solutions related to the renovation of thin-layer plasters THERMATynk-M and Arte-Fix M.
Arte-Fix M is a ready-to-use product, without the need to dilute it with water. It is used for renovation and surface strengthening of coatings that have lost their shine after years. The varnish stain can also be applied to mosaic plasters from other manufacturers of construction chemicals.
• Resistant to difficult weather conditions,
• Provides a durable and flexible coating,
• Very easy renovation of mosaic plasters,
• For indoor and outdoor use,
- ready to use (mix),
- high efficiency,
- available in 15 colors and as a transparent base,
IMPORTANT INFORMATION:
- Average consumption about 0.2 kg/m2,
- Drying time: minimum 4 hours,
- Application temperature: +5°C to +28°C,
- Shelf life: 12 months,
APPLICATION:
It should be used without dilution with water to obtain permanent surface strengthening. The varnish stain is used for the renovation of mosaic plasters based on colored quartz and natural aggregate (marble, granite) placed on:
- Concrete,
- Insulation systems,
- Cement and lime plasters,
The decorative and renovation varnish can be used universally inside and outside buildings.
PROPERTIES:
Thanks to the use of the preparation, the applied layers bind and dry evenly, achieve the assumed strength parameters and preserve and strengthen the surface of mosaic plasters. After drying, it forms a transparent coating or in a selected color. The product is based on mixtures of polymer dispersions and specialized modifying admixtures.
HOW TO USE:
The substrate should be stable and free from any contaminants that could impair the adhesion of the preparation, especially dust, dirt, oil and grease. It is unacceptable to improve the product by adding other chemicals that may lead to the degradation of active substances. Before use, mix the product with a low-speed mixer. Apply the product to the prepared and dry substrate using a paint roller until the surface is completely wet. Do not use too thick layers during application, due to excessive accumulation of the preparation between the plaster aggregate. If necessary, after complete hardening of the surface (24-36 hours), it is recommended to reapply the preparation.
