Sprinter-FT is a liquid admixture that accelerates the setting time - we recommend using the product in conditions of reduced air temperature and to lower the freezing point.
Sprinter-FT allows you to perform plasters and paint coatings in conditions of low temperatures: above 0°C to +10°C and increased air humidity.
- agent that accelerates the setting and drying of acrylic and silicone paints & plasters,
- does not change color,
- does not change the physical properties of plasters and paints,
- simple to apply,
SUBSTRATE PREPARATION:
Preparation of the substrate: the substrate must not be frozen and must meet the requirements for proper preparation of the substrate for thin-layer plaster or facade paint.
Sprinter -FT is prepared ready for use.
DOSAGE RATIO:
- For a 25 kg package of plaster - 250 ml,
- For a 10 L package of paint, plaster primer - 150 ml,
After thorough manual or mechanical mixing, application can be started.
IMPLEMENTATION RECOMMENDATIONS:
The recommended temperature for work above 0°C is +10°C, relative air humidity below 80%. Immediately after application - the first stage of the binding process must take place at temperatures above 0°C to +10°C, protected from frost. Freshly applied material becomes resistant to precipitation after approximately 6-8 hours, depending on the ambient temperature and humidity. When the relative air humidity exceeds 80%, the use of the agent may stop the setting of plasters and paints. When used indoors, ensure good ventilation.
COMMENTS:
Maintain basic protective measures, use protective glasses, gloves, and do not inhale the fumes. It is irritating to eyes and skin. Keep away from children. Avoid eye contamination. Rinse contaminated eyes immediately with plenty of water. Wear appropriate protective clothing, appropriate protective gloves and goggles or face protection. Proceed in accordance with the Safety Data Sheet.
DURABILITY:
24 months from the production date indicated on the packaging, the production date is also the batch designation.
STORAGE:
Store in a tightly closed container at temperatures from 0°C to +10°C.
Protect against overheating.
PACKAGING:
Bottle 250 ml
