AUXILIARY PRODUCTS

no.0080

ANTIGLO - a biocidal agent for combating algae and fungi, removing microbiological contamination and preserving walls.

PACKAGING: 5 L, canister

ANTIGLO is a specialized biocidal product intended to combat algae and fungi on various surfaces, including walls, building facades, external surfaces, as well as for cleaning machines, devices and non-wooden building materials. It is applied to surfaces affected by algae or fungi to remove them and prevent further growth, and is usually applied before painting. ANTIGLO is used to clean surfaces such as stone, brick, acrylic, silicone, silicate, mineral plasters, etc. from microbiological infections. 

ANTIGLO can also be used to clean production equipment such as tanks, pumps, power lines, etc. It has a wide range of applications and is effective in combating and removing bacteria, algae and fungi that can cause microbiological corrosion in water installations. 


Biocidal products should be used taking precautions. 


IMPORTANT INFORMATION: 

- preparation for removing microbiological contamination, 
- recommended for combating algae and fungi, 
- for maintaining walls, 
- building materials other than wood, 
- consumption: 0.1 - 0.5 l/m2, 
- for use: outdoors and indoors, 
- shelf life: 12 months, 


PURPOSE: 

ANTIGLO is an agent that combats algae and fungi, used to maintain and protect stonework, masonry structures or building materials other than wood, for example wall surfaces, facades, including insulation systems, plasters , concrete, limestone, stones, etc. ANTIGLO is recommended for use inside and outside buildings. 

The manual specifies the scope of use of the product and the recommended method of performing the work, but cannot replace the professional preparation of the contractor. The manufacturer guarantees the quality of the product, but has no influence on the conditions and method of its use.

HOW TO USE: 

Do not dilute ANTIGLO before use. Clean the infected area with a strong jet of water to remove debris. Once dry, apply ANTIGLO generously to the infected surface until completely wet, for example with a brush or sponge, and leave for at least 6-12 hours. Then remove any remaining dirt mechanically, for example with a brush or high-pressure water. If necessary, after the surface has completely dried, it is recommended to reapply ANTIGLO. The effect of the treatment will be visible after about 3 days. Further work, such as painting or plastering, can only be carried out after the surface has completely dried and after the final application of the ANTIGLO biocide. The product is a liquid (aqueous solution) ready for use. 
 

FIRST AID: 

- Inhalation: supply fresh air, 
- Ingestion: rinse mouth and drink plenty of water, 
- Skin contamination: wash immediately with soap and water and rinse well, 
- Eye contamination: rinse eyes with running water for at least 10 minutes, keeping eyelids wide open, 


GENERAL RECOMMENDATIONS: 

Do not allow the product to enter the sewage system, watercourses and open reservoirs. For example, after emptying the packaging, dilute small amounts of unused product with a large amount of water and pour it down the drain. Send large quantities of the product to an authorized hazardous waste recipient. After emptying and cleaning, the packaging can be reused. 


WARNINGS AND RECOMMENDATIONS: 

- Keep out of the reach of children, 
- Wash your hands thoroughly after use, 
- Dispose of the contents and container to an appropriate place, 
- May cause an allergic reaction, 


CONSUMPTION: 
 
Consumption is from 0.15 L/m2 depending on the stage of use and condition the substrate to be maintained. 


STORAGE: 

Store the product tightly closed in original packaging at temperatures from +5°C to +28°C. Ensure good ventilation in the area where you work with the product. 


SHELF LIFE: 

The shelf life of the product is 12 months from the production date indicated on the packaging. 


PACKAGING: 

5 liter, canister 


PALLET: 

5L x 108 pieces = 540 liters.

CONTACT

Tel: +251 969 911 100
Tel: +251 911 209 922

E-maim: arsanit4u@gmail.com