A protective coating that protects the facade against graffiti. Suitable for vertical surfaces on mineral substrates such as concrete, cement and cement-lime plasters. The product has good adhesion to facade paints, plasters, stone claddings (natural stone, sandstone) and provides excellent resistance to external conditions such as rain, sun and extreme temperatures.
AntiGRAFFITI is a one-component product that hardens chemically in the presence of ambient temperature and humidity. The cured coating provides excellent release and easy removal of most markers and spray paint.
- renewable, washable silicone layer,
- graffiti removal with water,
- 1-component coating ready to use,
- resistant to mechanical abrasion,
- flexible and impact-resistant,
- vapor permeable,
- has self-cleaning properties,
- microbiological protection,
- increases color durability,
IMPORTANT INFORMATION:
- Consumption: 150 – 250 g/m2 (single-layer application),
- Application temperature: +5°C to +28°C,
- Application method: manual / mechanical,
- Shelf life: 12 months,
PROPERTIES:
The anti-graffiti coating contains a mixture of silicon compounds. Silicone ingredients with a relatively high molecular weight react with moisture to create an anti-graffiti coating with excellent adhesion to the surface of facade plasters. This way it improves its resistance to weather conditions and breathability.
PREPARATION OF THE SUBSTRATE:
The substrate should be strong and even, clean of dust, lime, grease, dirt, oil, wax, and remnants of chalk, lime, emulsion and oil paint. Old paint and plaster coatings with insufficient adhesion should be removed and any defects filled. Before applying the anti-graffiti coating, regardless of the type of substrate, the surface should be primed with JOKERGrunt-SNZ using a painting technique .
EXECUTION:
Applying the Antigraffiti Coating to a clean, dry surface. AntiGRAFFITI is applied by airless spray, but a brush or roller are also suitable methods of application, especially on small surfaces. AntiGRAFFITI hardens quickly when applied to a dry substrate and is exposed to high humidity in the air. It is not recommended to use the preparation on dry days. Curing occurs at the surface and continues into the substrate based on available ambient humidity. The coating will dry completely within 24 hours. Once opened, containers should be used until empty. Any remaining coating, when exposed to air, will continue to harden and thicken, causing surface skinning and increased viscosity.
TOOLS:
Tools and spraying equipment should be washed immediately with a solvent to prevent the coating from hardening and forming a hard, adhesive cured coating.
STORAGE AND TRANSPORT:
AntiGRAFFITI should be transported and stored in tightly closed buckets, at a temperature of +5°C to +25°C.
Protect against moisture and frost.
The shelf life is 12 months from the production date indicated on the packaging.
DATE OF PRODUCTION:
Specified on the packaging.
PACKAGING:
Metal can 5 kg
