Waterproofing is the protection of surfaces against water and moisture in particularly exposed rooms, such as bathrooms, kitchens, balconies and terraces. Our offer includes several advanced waterproofing products, enabling work to be carried out in the most professional manner.

no.0045

HYDROGRUNT - a concentrated primer that penetrates deeply into the substrate, used to strengthen cement screeds and reduce the crumbling of their surfaces. The priming compound helps regulate the absorbency of the substrate and increases the adhesion of subsequent layers and increases the flow of the screed itself.

no.0046

HYDROIZOLATOR - one-component liquid foil, ready-to-use sealing compound intended for waterproofing inside and outside buildings. After drying, it creates a durable, flexible insulating coating. Perfect for terraces and balconies and for wet rooms such as bathrooms, baths, kitchens, shower cabins, laundries and industrial rooms.

no.0047

HYDROIZOLATOR 1K - one-component flexible waterproofing based on cement and synthetic resins. Suitable for sealing balconies, terraces, bathrooms and swimming pools.

no.0048

HYDROISOLATOR 2K - flexible two-component waterproofing designed to protect against water and moisture, recommended for use inside and outside buildings. It is intended for sealing the surfaces of terraces and balconies and the so-called wet zones, in sanitary rooms such as showers, bathrooms, laundry rooms, etc. It can also be used on the surfaces of basement walls and foundations exposed to constant contact with groundwater.

nr.0049

TAŚMY IZOLACYJNE - waterproofing tapes are intended to increase the tightness of places particularly exposed to moisture, such as corners, wall-floor connections, etc., and to ensure tightness in places of stress and cracks when waterproofing inside buildings. Insulating tapes are recommended for sealing under ceramic tiles.

Before we start waterproofing works, we first prepare the substrate, which should be dry, clean and degreased. Loosely adhering plaster, paint residues and other coatings should be removed. After the prepared and cleaned substrate, apply HYDROGRUNT using a brush or roller in a thin, even layer. Highly absorbent surfaces can be re-coated. During priming, the substrate temperature should be from +5°C to +30°C. Further work can be carried out after the substrate is completely dry.



After the substrate is completely dry, we can start applying the HYDROIZOLATOR waterproofing , which we choose from our offer depending on the substrate, conditions, location and needs. All our waterproofing products will certainly meet your expectations, provided they are used in accordance with the instructions.

CONTACT

Tel: +251 969 911 100
Tel: +251 911 209 922

E-maim: arsanit4u@gmail.com