JOKER FARB-STZ is a silicate paint intended for painting mineral substrates such as cement, cement-lime plasters and thin-layer mineral plasters. It is also used for painting raw surfaces made of concrete, as well as bricks, blocks, hollow bricks and other similar ceramic or lime-sand materials. Thin-layer mineral plasters can be painted with JOKER FARB-STZ silicate paint already on the third day after their application. JOKER FARB-STZ is also suitable for renovation painting of surfaces previously covered with silicate paints. The paint can be used outside and inside buildings.
White or 365 colors.
- The paint is now ready for use,
- Protects against moisture,
- High vapor permeability,
- Resistant to dirt,
- Resistant to algae and fungi,
- Used outside and inside buildings,
- Resistant to weather conditions,
- White or 365 colors,
JOKER FARB-STZ is the latest generation of silicate paint, made on the basis of water glass with the addition of high-quality chemicals. JOKER FARB-STZ penetrates deep into the substrate, creating a matte, smooth coating without wrinkles and cracks. It is vapor permeable, which allows water vapor to flow freely and release moisture through the applied façade. JOKER FARB-STZ provides excellent protection of the painted surface against moisture and is resistant to dirt, algae and fungi.
IMPORTANT INFORMATION:
- Consumption: 0.30 L / m2 (when painting twice),
- Gloss level: matte,
- Application temperature: +8°C to +28°C,
- Drying time: 2 to 6 hours,
- Application method: hand / machine spraying,
- Shelf life: 12 months,
JOKER FARB-STZ has very good covering properties and is resistant to dirt, weathering, precipitation and all types of aggressive ingredients contained in both the substrate and the natural environment.
PREPARATION OF THE FACADE FOR PAINTING
Here are some steps you should take before painting your facade.
CLEANING THE FACADE:
Before painting the facade, it should be thoroughly cleaned; the substrate should be dry, stable and free from dust, dirt and grease. Old, loose and cracked paint coatings should be removed. This can be done using a pressure washer or special cleaning agents.
REPAIR OF DAMAGES:
If there are any damages, defects or cracks on the facade, they should be repaired and filled with special RAPID repair compounds:
- ZW-013 MORTAR,
- RAPID CONCRETE RC-10,
- RAPID CONCRETE RC-20,
- RAPID CONCRETE RC-30,
PRIMING:
Before painting the facade, it should be primed with JOKER GRUNT-STZ. The primer will ensure better adhesion of the paint to the substrate and protect the facade against moisture.
PAINTING:
The facade can be painted with a roller or brush. JOKER FARB-STZ paint is applied from the top of the facade, creating even, overlapping stripes.
PAINT PREPARATION:
JOKER FARB-STZ silicate paint is delivered ready to use. After opening the bucket, its contents should be thoroughly mixed to even out the consistency and color. The paint can be diluted at substrate or ambient temperatures close to the maximum allowable temperature of +25°C / +28°C. For dilution, use JOKER GRUNT-STZ. You can add a maximum of 0.5 liters of preparation per 10 liter package. The adopted dilution proportions should be maintained on the entire painted surface. For final painting, use undiluted paint.
TOOLS:
Brush, paint roller or machine. Tools should be washed with clean water immediately after use.
HOW TO USE:
The surface prepared and primed with JOKER GRUNT-STZ primer should be covered with a thin, even layer of JOKER FARB-STZ paint. Painting can be done with a roller, brush or by spraying, once or repeatedly, depending on the absorbency and structure of the substrate. Technological breaks in painting should be planned in advance, for example in the corners and bends of the building, under downspouts or in places where colors join. Paint should be applied to the previously planned surface without interruption, maintaining continuity of work. The painted surface should be protected both during painting and during the paint drying process against direct sunlight, wind and precipitation. The drying time of the paint, depending on the type of substrate, temperature and air humidity, is approximately 2 to 6 hours.
