RAPID CONCRETE RC-10 - mortar intended for creating a contact layer and anti-corrosion protection in the concrete repair system. The system enables the repair of concrete and reinforced concrete damaged by mechanical or corrosive factors. Suitable for repairing elements such as balconies, terraces, brackets, poles, lintels, etc.
- mortar for structural repairs of concrete and reinforced concrete substrates,
- high adhesion to the substrate,
- creates a bonding layer,
- does not cause corrosion of steel,
- easy to use,
RAPID CONCRETE RC-10 is a mortar that can also be used as a repair layer for minor damage or as a base for decorative surface finishing.
IMPORTANT INFORMATION:
- Mixing proportions: 7.5 L of water for 25 kg of mortar,
- Layer thickness: from 5 mm to 15 mm,
- Application temperature: +5°C to +28°C,
- Traction: very high,
- Wear time: Up to 2 hours,
- Shelf life: 6 months,
HOW TO USE:
The RAPID CONCRETE RC-10 dry mix should be mixed with an appropriate amount of clean water, mixing manually or mechanically using a mortar mixer. After mixing, adjust the amount of water added. The established mixing ratio with water should be recorded so that subsequent batches of mortar are prepared in the same way. Corroded concrete should be removed, the steel cleaned and covered with RAPID CONCRETE RC-10. The concrete surface should be rough with good adhesion and resistant to peeling. The concrete cover around the reinforcing steel should be chipped away to a point that does not show corrosion. Cleaned bars should not be left without covering them with RAPID CONCRETE RC-10 mortar. The concrete surfaces should be slightly moistened with water before applying the bonding layer.
Do not mix hardened mortar with water or fresh material.
STORAGE:
In dry places and in undamaged packaging, maximum 6 months from the production date indicated on the packaging.
Protect from moisture.
PACKAGING:
25 kg, bag
PALETTE:
25 kg x 48 pieces = 1200 kg
